Remove the screws [146s] [ 0m </ font>]
Enable developer mode [0m] [ 300s </ font>]
FW installation script execution [51s] [ 0m </ font>]
Run OS installation script [0] [ 558s </ font>]
Total [17.5 minutes] [ 14.3 minutes </ font>]
STEP1 Remove the screw ** Enter developer mode ** Turn on the power while pressing and holding the reset switch for a few seconds Press Ctrl + D on the "Insert USB memory or SD card for restoration" screen. Press the reset switch again on the "Press the recovery button to turn off the OS confirmation function" screen. After rebooting, the "OS confirmation function is turned off" screen is displayed. (Can be skipped with Ctrl + D) The "Transitioning the system to developer mode" screen is displayed. After a certain period of time, the screen will switch to the "Welcome" screen. ** FW installation script execution ** Press Ctrl + Alt + F2 on the "Welcome" screen. Make sure you are connected to the internet. The screen will switch to the CUI login screen, so log in with chronos. Execute the following command.
sudo su
curl -O www.webproj.jp/chromescripts/CN60.sh;
bash CN60.sh
Or
sudo su
curl -O www.webproj.jp/fw.sh;
bash fw.sh
OK when SUCCESS is displayed Insert the USB memory and restart, go to the next step
STEP2 ** Boot OS for installation from USB ** Press Esc at boot time and select USB from the boot device list The top entry is selected on the blue screen (grub), so press Enter ** OS installation script execution ** After starting, when [Give Root password for maintainance] is displayed, enter the password to log in and execute the following command
Please select the one in the curly braces according to the device.
cd /clonescripts/
bash [CN60/62/65]copyos.sh
Reboot when complete. Next, set the seat number.
sudo setup.sh
The seat number format is [A-Z] [1-9] {0,1}-[0-9] {2} ex. A-01
URL Screw position https://kodi.wiki/view/Chromebox This page https://qiita.com/mitsuya99/private/b76bc02a2320f6ab2dae
Troble Shooting
Not unscrewed
Hardware write-protect enabled. cannot set Boot Options / GBB Flags. If it is not unscrewed, it will be solved by unscrewing it, but it may come out regardless of whether it is unscrewed. It is a problem of contact around the screw. If you have a tester, make sure there are no shorts between the fan-shaped metals.
Try changing the keyboard to one with a different keyboard layout.
Recommended Posts